Is It Time For A Blown Double Glazing Repair?
Condensation can be an indication that your double glazing has blown. This is because the seal between the two glass panes has broken causing inert gas to escape.
Repairing your double-glazed windows is an absolute must. It will not just save you money and reduce noise from outside, but it will also restore the insulation properties of the window.
Seals that have been damaged
The window seals on a double-glazed unit are responsible for forming an airtight and watertight barrier that keeps cold and heat out. The seals can become damaged and cause drafts, windows that are misty and energy loss. If you find that your seals are beginning appear worn, it's time to replace them or repair them.
One of the first symptoms you'll notice is condensation that is forming between the glass panes. This is due to the fact that the inert gas inside the sealed unit fails to function properly and allows warm air from outside to get into your home. The inert gas is not restored once this occurs.
A dark, mouldy look on your window frames or windows is another common indication. This is typically an indication that the seals are broken and the moisture is entering the frame. This could lead to the timber becoming soft as well as peeling and warping of the paint. When the window is replaced the moisture that was in the frame can be removed. You can then regain your original energy efficiency.
If you decide to get your windows repaired or replaced you should also consider upgrading your double-glazing to A-rated energy efficient glass since this will increase your thermal efficiency and reduce your energy costs. You can check the energy ratings of your windows by calling the manufacturer or looking online.
A window that is draughty could suggest that the seals have become damaged or have blown. If the window is able to keep the cold out it can be worthwhile to have the seals replaced as quickly as possible as this will aid in improving the overall performance of your windows.
A simple test that you can use to see if your window seals are broken is to rub the edge of your window with some ice for a couple of seconds. If you're unable to remove the fog from the window and the seals are not able to be repaired, then they are likely to be broken. It is important to act quickly on this as it can reduce the insulation of your double glazing, leading to greater energy costs.
Water Leaks
Double glazing is a worthwhile investment that will add warmth to your home, reducing noise and improving energy efficiency, which will save you money over the long haul. It's no surprise that homeowners have problems with their windows. Condensation between the panes is a common issue which can cause homeowners to replace their double-glazed windows. This can result in a dirty appearance or even worse, it could allow water to enter your home.
Water vapour condenses on glass, forming a layer of moisture that cannot be removed. This is a normal occurrence that happens when the temperature drops in the evening, or when the windows are left exposed to rainy weather like heavy dew. window repair Huntingdon can be solved by ensuring your home is adequately ventilated and by putting in an air humidifier in any space susceptible to moisture accumulation.
If you're unable to wipe away the moisture from the double-glazed window then it's likely that the unit has been blown. This is the only way that water can be able to enter an enclosed unit after the gas has evaporated. Some companies claim to be able to repair double-glazed units that have mist by drilling tiny holes into the glass and injecting chemicals into the holes. These chemicals absorb moisture from the unit. This could help remove the condensation and fog in a short space of time, but it's only temporary and will need repeated.
Once a sealed unit has been blown, it will be irreparable and your double glazing will require replacement as it will no longer possess the thermally insulating properties it had when it was brand new. It is important to determine whether your double glazing is still within warranty with the company that installed it, in this instance, they must reinstate the warranty or offer a discount to replace the unit.
Many online stores sell kits that are simple to use and can be used to repair misted double glazing. This involves drilling small holes into the glass, and spraying a particular resin into the gaps to stop moisture from leaking through. This is a much more economical and long-lasting solution but it must be done professionally by someone with the necessary expertise in this field.
Deterioration
If the seals on your double glazing are not working properly, moisture could get between the panes in the windows and cause them to become misty. This could lead to the windows losing their effectiveness as they can no longer keep the cold out and warm in.
Depending on your circumstances, misting can also cause water to form within your double glazing. This can cause damage to the frame, and if not dealt with, could cause water leaks or even mould growth.
If your windows are covered by warranty, it's worth asking your installer for assistance with repair or replacement costs. If your windows aren't covered under warranty, you'll need to contact a professional to repair the damage.
A professional can replace your damaged double glazed windows, restoring their thermal efficiency as well as removing the condensation buildup. As soon as you notice a haze, it's crucial to get the windows fixed. This will reduce your energy costs and prevent water from getting into your walls or plaster that could cause serious damage.
A double-glazed window repair that is blown can not only improve the performance of the double glazing but also ensure your safety and that of your family. Window repairs that are blown often have large gaps between the glass, which are not ideal for animals and children to play with. A professional can equalise the pressure by drilling a tiny holes and then using silicone sealant to seal your windows.
It's a good idea to verify your double-glazed windows if they are under warranty, and if you don't see any contact information, you should ask your supplier to provide them as you might be eligible to claim back a portion of the installation costs. It is worth checking if your windows are covered by a lifetime warranty. It is recommended to contact your provider as soon as you notice any problems regarding your double-glazed windows, either in person or over the phone, and then follow up in writing, if you are able to.
Poor Insulation
Double glazing is an investment that will add warmth to your home and block out external noise. They also provide insulation and energy efficiency improvement for any home. Like any home improvement, there are always possible issues. One example is when double glazed windows start to mist. Windows that have mist are ugly and can smudge your clean appearance. They also pose an health hazard due to the buildup of moisture. This can be corrected with professional double glazing repair.
If you notice a buildup of condensation on your double-glazed windows it's likely that there's an issue with the gas cavity between the glass panes. This signifies that the gases that are inert have evaporated and allowed warm air to be able to enter your home. This is a serious issue that needs to be fixed since double glazing won't serve its intended purpose, and your home will become colder.
The appearance of mist on the outside of your window is an natural phenomenon that occurs mostly at night and in the early hours of the morning, when temperatures drop and dew forms. This is nothing to worry about and is the result of your windows working just as they ought to.
Moisture on the inside of your double-glazed windows is a different issue. This is often due to low ventilation and humidity levels within your home. Utilize extractor fans to decrease humidity in the bathroom and kitchen. Also open your windows often to allow fresh air circulation.
The majority of the time, a blown double glazing repair only involves replacing the damaged glass. A qualified tradesman first evaluates the condition of your window frame, and then takes accurate measurements to ensure that a new window can be cut to size. They will then remove the old window and replace it with the replacement making sure that the seals are fitted correctly to stop any moisture from seeping into your home.